Master audio NT Serie Manual Del Usuario página 24

Amate Electroacústica,s.l.
2.1.3. Connection with an active subwoofer (Active models)
Plug into the INPUT of the cabinet (from a Mixer's output) and then use the LINK
output to carry the signal to the input of the active subwoofer.
The levels of the subwoofer and the Full Range cabinet can be adjusted through the
Gain potentiometer.
Fig.5. Connection with active subwoofer
2.1.4. Stereo configuration (passive models)
Connect the LEFT output of the amplifier to the first cabinet. Connect the RIGHT
output of the amplifier to the second cabinet.
In case of Active cabinets, connect the mixer's outputs to the cabinet's inputs.
Fig.6. Stereo configuration
NT Series.Version 1.2 Dec08
24