Mounting And Placement - Master audio NT Serie Manual Del Usuario

Amate Electroacústica,s.l.
Fig.9. Bi-amplified with subwoofer configuration (option 2)

3.MOUNTING AND PLACEMENT

For a proper installation of the acoustic cabinet systems, it is strongly recommended
to carefully read the following advices.
3.1. Placement
The "Full Range" cabinets should be located in a high position (between two or three
meters), slightly inclined to the audience. If the loudspeakers are located too low, the
listeners at the end of the room will not hear a good sound quality.
Fig.10. Flying placement
They may be located together, in cluster form, one next to the other, taking
advantage of their trapezoidal shape. They may be also located one on top of the
other one, always trying to maintain the slight inclined orientation that guarantees the
best coverage both in horizontal or vertical.
It is advisable to locate the low units on the floor as they can take advantage of the
so-called "floor-effect", thus increasing the response in the low frequencies.
If possible, place the subwoofers under the same acoustic axis used for the satellites.
If the above option can not be carried out, then they should be placed in an
intermediate point between the left and right channels.
NT Series.Version 1.2 Dec08
26