D-Link DGS-1052 Guía De Instalación Rápida página 2

Quick Installation Guide
Check Your Package Contents
These are the items included with your DGS-1052 purchase:
DGS-1052
Notice Before Setup the DGS-1052
The setup of the Switch can be performed using the following steps:
A. Install the DGS-1052 in a fairly cool and dry place. See Technical Specifications for the acceptable operation
temperature and humidity ranges.
B. Install the Switch in a site free from strong electromagnetic source, vibration, dust, and direct sunlight.
C. Leave at least 10cm of space at the left and right hand side of the Switch for ventilation.
D. Visually inspect the power cable and ensure that it is firmly inserted into a suitable power outlet.
Installation
Desktop or Shelf Installation
When installing the Switch on a desktop or shelf,
the rubber feet included with the device must be
first attached. Attach these cushioning feet on
the bottom at each corner of the device. Allow
enough ventilation space between the device and
the objects around it.
DGS-1052
Quick Installation
Guide
Power Cord
Rack Installation
The Switch can be mounted in an EIA standard
size, 19-inch rack, which can be placed in a
wiring closet with other equipment. To install,
attach the mounting brackets on the switch's
front panel (one on each side) and secure them
with the screws provided.
Then, use the screws provided with the
equipment rack to mount the Switch in the rack.
2
Rack-mount bracket