Uline OHAUS DEFENDER 5000 XTREME Manual Del Usuario página 3

ENABLE UNITS OF MEASURE
Units of measure must be enabled in the Unit menu to
select from the PRINT UNITS button.
Once in the Unit Menu, you may turn
units of measure on and off.
(See Figure 2)
Figure 2
Reset:
Kilograms:
Pounds:
Grams:
Ounces:
Pounds:Ounces Off, On
Tonnes:
Custom:
End Unit
*Default settings are bold.
1. Press Yes to accept the current setting (ON or OFF).
2. Press No to change the current setting (ON or OFF).
RESET
Set the Unit menu to the factory
default settings.
NO = Not Reset
YES = Reset
NOTE: If the Legal for Trade
menu item is set ON, the
settings are not reset.
KILOGRAM UNIT
Set the status:
OFF = Disabled
ON = Enabled
POUND UNIT
Set the status:
OFF = Disabled
ON = Enabled
GRAM UNIT
Set the status:
OFF = Disabled
ON = Enabled
PAGE 3 OF 30
OPERATION CONTINUED
UNIt
No, Yes
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On (-> Factor, Exponent, LSD)
Exit UNIT menu
OUNCE UNIT
Set the status:
OFF = Disabled
ON = Enabled
NOTE: Ounce Unit is not
available when Range
is set to Dual.
POUND OUNCE UNIT
Set the status:
OFF = Disabled
ON = Enabled
NOTE: Pound Ounce Unit is
not available when Range
is set to Dual.
TONNES UNIT
Set the status:
OFF = Disabled
ON = Enabled
CUSTOM UNIT
Use Custom Unit to display weight in an alternative
unit of measure. The custom unit is defined using a
conversion factor, where the conversion factor is the
number of custom units per kilogram expressed in
scientific notation (Factor x 10ˆExponent).
For example: To display weight in troy ounces
(32.15075 troy ounces per kilogram) enter a Factor of
kg
3.21508 and an exponent of 1.
Set the status:
OFF = Disabled
ON = Enabled
NOTE: Custom Unit is not
lb
available when Range is set
to Dual.
Factor:
Set the conversion factor:
0.00001 to 9.99999
g
0615 IH-4595
•