Important Safety Instructions; Grounding Instructions; User Maintenance Instructions - Steelcase Bivi Instrucciones De Montaje

®

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical furnishing, basic precautions should always be followed,
including the following: Read all instructions before using the bivi powered table system.
DANGER
- To reduce the risk of electric shock:
Always unplug this furnishing from the electrical outlet before cleaning.
WARNING
- To reduce the risk of burns, fire, electric shock, or injury to
persons:
1) Unplug from outlet before putting on or taking off parts.
2) Use this furnishing only for its intended use as described in these instructions. Do
not use attachments not recommended by the manufacturer.
3) Never operate this furnishing if it has a damaged cord or plug, Return the
furnishing to a service center for examination and repair.
4) Keep the cord away from heated surfaces.
5) Never operate the furnishing with the air openings blocked. Keep the air openings
free of lint, hair, and the like.
6) Never drop or insert any object into any opening.
7) Do not use outdoors. For dry indoor use only.
8) Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
9) Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only.
See Grounding Instructions.
SAVE THESE INSTRUCTIONS
This appliance is intended for commercial and residential use only.
Connect this appliance to a properly grounded outlet only. See Grounding Instructions.
Operating Instructions
Please refer to the attached Installation Instructions
User-Maintenance Instructions
The receptacle power block is equipped with a circuit breaker that will shut off power in
an overload condition. Press to reset the circuit breaker to restore power.
.

GROUNDING INSTRUCTIONS

This product must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric
shock. This product is equipped with a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
DANGER
- Improper connection of the equipment-grounding conductor
can result in a risk of electric shock. Check with a qualified electrician or serviceman if
you are in doubt as to whether the product is properly grounded. Do not modify the
plug provided with the product - if it will not fit the outlet, have a proper outlet installed
by a qualified electrician .
This product is for use on a nominal 120-V circuit and has a grounding plug that looks
like the plug illustrated in Figure 67.1. Make sure that the product is connected to an
outlet having the same configuration as the plug. No adapter should be used with this
product.
GROUNDED
OUTLET
(A)
GROUNDING
PIN
Figure 67.1
Grounding methods
120 V 60 HZ 15 Amp
Page 5 of 16
P/N 939500450
GROUNDED
Doc # 75385 Rev F