Safety Instructions - Korman tx 504114 Manual De Instrucciones

SAFETY INSTRUCTIONS

All instructions must be read and observed in order
to work safely with the laser device. Never make war-
ning signs on the laser device unrecognisable.
SAVE THESE INSTRUCTIONS FOR FUTURE REFE-
RENCE AND INCLUDE THEM WITH THE LASER DE-
VICE WHEN GIVING IT TO A THIRD PARTY.
• Caution – The use of other operating or adjusting
equipment or the application of other processing
methods than those mentioned here can lead to dan-
gerous radiation exposure.
• The laser device is provided with a warning label.
• Before operating for the first time, stick the pro-
vided warning label in your national language over
the product nameplate (marked with number 5 in the
representation of the laser device on the graphics
page).
• Do not direct the laser beam at persons or animals
and do not stare into the direct or reflected laser
beam yourself, not even from a distance. You could
blind somebody, cause accidents or damage your eyes.
• If laser radiation strikes your eye, you must deli-
berately close your eyes and immediately turn your
head away from the beam.
• Do not make any modifications to the laser equip-
ment.
• Do not use the laser viewing glasses as safety go-
ggles. The laser viewing glasses are used for improved
visualisation of the laser beam, but they do not protect
against laser radiation.
• Do not use the laser viewing glasses as sun glasses
or in traffic. The laser viewing glasses do not afford
complete UV protection and reduce colour perception.
• Have the laser device repaired only through qua-
lified specialists using original spare parts. This
ensures that the safety of the laser device is maintained.
• Do not allow children to use the laser device wit-
hout supervision. They could unintentionally blind other
persons or themselves.
• Do not operate the laser device in explosive envi-
ronments, such as in the presence of flammable
liquids, gases or dusts. Sparks can be created in the
laser device which may ignite the dust or fumes.
• Keep the laser device away from car-
diac pacemakers. The magnets of the
laser device generate a field that can im-
pair the function of cardiac pacemakers.
• Keep the laser device away from magnetic data
medium and magnetically-sensitive equipment. The
effect of the magnets of the laser device can lead to irre-
versible data loss.
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
λ: 510 nm P:<1mW EN 60825-1:2014
RADIACION LÁSER
NO MIRAR DIRECTAMENTE AL HAZ
PRODUCTO LÁSER DE CLASE 2
λ: 510 nm P:<1mW EN 60825-1:2014
RADIAÇÃO LASER
NÃO OLHAR PARA O RAIO
PRODUTO LASER DA CLASSE 2
λ: 510 nm P:<1mW EN 60825-1:2014
4
DESCRIPTION
1. Intended use
The laser device is intended for determining and chec-
king horizontal and vertical lines.
The laser device is suitable exclusively for operation in
enclosed working sites.
2. Product features
The numbering of the product features shown refers to
the illustration of the laser device on the graphic page.
1. Exit opening for laser beam
RAYONNEMENT LASER
NE PAS REGARDER DANS LE FAISCEAU
2. Automatic levelling indicator
APPAREIL À LASER DE CLASSE 2
3. Operating mode button
λ: 510 nm P:<1mW EN 60825-1:2014
4. On/Off switch
5. Laser warning label
6. Tripod mount 1/4''
RADIAZIONE LASER
7. Latch of battery lid
NON FISSARE IL FASCIO
8. Battery lid
APPARECCHIO LASER DI CLASSE 2
9. Laser viewing glasses *
λ: 510 nm P:<1mW EN 60825-1:2014
10. Tripod *
* The accessories illustrated or described are not
included as standard delivery.
3. Technical data
360° line laser level
Power 6V DC (4x1.5V AA LR6 battery)
Working time ≥ 3h
Laser wave length 510 nm
Laser power / Class < 1 mW / Class 2
Laser line width 100 Lux, 2 mm / 5 m
Working range (diameter) 30 m
Accuracy ± 0.5 mm/m
Levelling time ≤ 5 s
Levelling range ± 4°
Working temperature 0°C-40°C
Weight 402 g (without batteries)
Dimensions (L x W x H) 112 x 84 x 107 mm
The safe use of this product requires an understanding
of the information on the tool and in this instruction
manual, as well as knowledge of the project you are at-
tempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
ASSEMBLY
Inserting/Replacing the batteries
Alkali-manganese batteries are recommended for the
laser device.
To open the battery lid, press the latch and fold the
battery lid up. Insert the batteries. When inserting, pay
attention to the correct polarity.
Always replace all batteries at the same time. Only use
batteries from one brand and with the identical capacity.
EN