Product-Dependent Symbols; Symbols On The Product; Product Information; Declaration Of Conformity - Hilti IC-BLE Manual De Instrucciones Original

1.3

Product-dependent symbols

1.3.1

Symbols on the product

The following symbols can be used on the product:
The power tool supports near-field communication (NFC) technology, which is compatible with
iOS and Android platforms.
If applied on the product, the product has been certified by this certification body for the US and
Canadian markets according to the applicable standards.
1.4

Product information

products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Bluetooth module
Generation
Serial no.
1.5

Declaration of conformity

The manufacturer declares, on his sole responsibility, that the product described here complies with the
applicable legislation and standards. A copy of the declaration of conformity can be found at the end of this
documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-86916 Kaufering, Germany
2 Safety
2.1

General safety instructions

Read all safety instructions and other instructions. Keep all safety instructions and other instructions for
future reference.
▶ Stay alert, watch what you are doing and use common sense when working with the product. Do not
use the product while you are tired or under the influence of drugs, alcohol or medication. A moment of
inattention while operating the product can result in serious personal injury.
▶ Maintain power tools and accessories carefully. Check that moving parts operate satisfactorily and do
not jam, and whether any parts are broken or so damaged that the correct operation of the power tool
is adversely affected. If parts are damaged, have the parts repaired before using of the tool. Many
accidents are caused by poorly maintained power tools.
▶ Do not expose the product to rain or moisture. Water entering an electric device will increase the risk of
electric shock.
▶ Have the product repaired only by qualified specialists using only genuine Hilti spare parts. The safety of
the module can thus be maintained.
▶ Keep the product out of reach of children.
2.2

Product-specific safety instructions

▶ Check the contents of the packaging. Make sure that nothing is damaged and that the contents are
complete. If you notice defects or shortcomings that could impair the operability of the product, have
them rectified by qualified personnel.
▶ Make sure that the product is correctly installed and secured.
*2321964*
Set: IC-BLE
Receiver module: IC-RC
Remote control: IC-RM
01
2321964 English 9