Float
The fl oat 22 in the water tray 21 shows
when the tray needs emptying.
● If the fl oat 22 is clearly visible, empty the
water tray 21.
Preparation
This fully automatic espresso/coffee
machine grinds beans freshly for each
brew. If possible, use only beans for fully
automatic coffee and espresso machines.
Deep-freeze or store in a cool place in
sealed, airtight containers. Coffee beans
can be ground while frozen.
Important: Fill the water tank with fresh
water every day. The tank must always
contain suffi cient water for operating the
appliance. Do not allow it to become empty.
Tip: Pre-warm cups, especially small, thick
espresso cups, by placing on the cup shelf
15 or rinsing with hot water.
Using coffee beans
The appliance must be ready for use.
● Set the desired per-cup quantity using
dial 2.
● Select the desired coffee strength using
button
.
5
● Place the prewarmed cup(s) under the
coffee outlet 10.
● Press the coffee dispensing button
once for 1 cup or twice within three
seconds for 2 cups. The coffee is brewed
and dispensed into the cup(s).
Note
If you select two cups, the grinding and
brewing process is performed twice.
● Coffee dispensing stops automatically
when the selected quantity has been
dispensed.
The brewing process can be terminated
i
by pressing the coffee dispensing button
again. When coffee is brewed for
4
2 cups, it is dispensed via two outlet
nozzles (place the cups side by side).
Using ground espresso/
coffee powder
The appliance must be ready for use.
● Set the desired per-cup quantity using the
dial 2.
● Place the prewarmed cup(s) under the
coffee outlet 10.
● Open the cover of the ground coffee duct
14.
● Add one to two level scoops of ground
coffee (grind: medium-fi ne) to the ground
coffee duct 14.
Note
Do not add whole beans or instant coffee!
Use a maximum of two level scoops of
coffee.
● Close the cover of the ground coffee duct
14.
● Press the coffee dispensing button
Repeat the process if a second cup is
i
desired.
Note: If coffee is not brewed within 90
seconds, the brewing chamber is emptied
automatically in order to prevent overfi lling.
The appliance is rinsed.
Preparing hot water
The appliance must be ready for use. This
function allows water to be heated for a cup
of tea, for example.
4
Risk of burns
!
The nozzle gets very hot. Do not touch the
metal parts!
● Place an appropriate cup under the
nozzle 9.
● Push the sleeve on the nozzle 9 all the
way down.
● Turn the dial 8 to
Risk of scalding
!
When the dial 8 is set to
may sputter a little. Do not touch the nozzle
9 or aim it at anyone.
9 or aim it at anyone.
9
● End the process by turning the dial 8
back to O.
/
/
/
.
g
h
h
8
8 is set to
/
/
/
, the nozzle
g
h
h
en
.
4
13