en
Steam for foaming milk
The appliance must be ready for use. You
can foam the milk fi rst and add the coffee
on top, or foam the milk separately and
pour it into the coffee.
Risk of burns
!
The nozzle gets very hot. Do not touch the
metal parts!
● Push the sleeve on the nozzle 9 all the
way down.
● Fill the cup approximately 1/3 full of milk.
● Press the
button. It will start to fl ash.
h
The appliance will heat up for approx. 20
i
seconds.
● Immerse the nozzle 9 deep into the milk,
but do not let it touch the bottom of the
cup.
● When the
button lights up and
h
appears on the display, turn the dial 8 to
/
/
/
.
g
h
h
Risk of scalding
!
When the dial 8 is set to
8
8 is set to
9 may sputter. Escaping steam is very hot
9
9 may sputter. Escaping steam is very hot
and may cause liquids to sputter. Do not
touch the nozzle 9 or aim it at anyone.
9
9 or aim it at anyone.
● Rotate the cup slowly until the milk is fully
foamed.
● End the process by turning the dial 8
back to O.
Note: When the nozzle 9 has cooled
down, clean it immediately. Dried residue is
diffi cult to remove.
Tip: If possible, use cold low-fat (1.5% fat)
milk.
14
8
/
/
/
, the nozzle
g
h
h
Steam for heating drinks
Risk of burns
!
The nozzle gets very hot. Do not touch the
metal parts!
The appliance must be ready for use.
● Push the sleeve on the nozzle 9 all the
way up.
● Press the
button. It will start to fl ash.
h
The appliance will now heat up for
i
approx. 20 seconds.
● Immerse the nozzle 9 deep into the liquid
you want to heat.
● When the
button lights up and
h
appears on the display, turn dial 8 to
.
h
Risk of scalding
!
When the dial 8 is set to
8 is set to
8
9
9 may sputter a little. Escaping steam is
9 may sputter a little. Escaping steam is
very hot and may cause liquid to sputter.
Do not touch the nozzle 9 or aim it at
anyone.
● End the process by turning the dial 8
back to O.
Note: When the nozzle 9 has cooled down,
clean immediately. Dried residue is diffi cult
to remove.
Maintenance and daily
cleaning
Risk of electric shock
!
Unplug the appliance before cleaning it.
Never immerse the appliance in water. Do
not use a steam cleaner.
● Wipe the outside of the appliance with a
damp cloth. Do not use scouring agents.
● Wash all removable parts by hand only.
● Rinse out the water tank 12 with water
only.
● Remove, empty and clean the trays for
coffee grounds 20 and residual water 21.
● Wipe out or vacuum the inside of the
appliance (tray holders).
8
/
g
/
/
/
, the nozzle
g
h
h
9
9 or aim it at