Ampro NEO FLEX TRUSS Manual De Usuario página 8

Led par 3-in-1 rgb 3w
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5. INFRARED (IR6) REMOTE CONTROL OPERATION
The IR6 infrared controller enables remote control of
the NEO FLEX TRUSS. To pair the IR6 to the NEO FLEX
TRUSS, follow these steps:
1. Press MENU button until SEr is displayed
2. Press ENTER
3. Press UP or DOWN to turn infrared operation
ON or OFF
4. Press ENTER
Ir6 button functions
AUTO: Run auto programs
FADE : Fade auto programs
SPEED: Enable speed adjustment of auto programs
+/ -: Increase / decrease speed of auto programs
SOUND : Activate sound-active mode
SENSITIVITY: Enable sound sensitivity adjustment
+/ -: Increase / decrease sound sensitivity
MANUAL : Enable static color selection
0-9: Select static colors
R: Select red
G: Select green
B: Select blue
A : Select ambar
+/ -: Increase / decrease output of each color
% : Enable adjustment of total light output level
+/ -: Increase / decrease total light output
STROBE: Enable adjustment of strobe rate
+/ - : Increase / decrease strobe rate
STROBE: Press again to turn o strobe
BLACKOUT: Turn o all light output
BLACKOUT: Press again to exit blackout mode
P. 8
NEO FLEX TRUSS
ENGLISH VERSION

Publicidad

Tabla de contenido
loading

Tabla de contenido