SystemRoMedic OneWaySlide Manual página 4

English
Placement of OneWaySlide
Check to ensure that the OneWaySlide lies securely on the seat cushion. A rough material
on the top of the seat cushion gives the best result.
Place the OneWaySlide as indicated by the arrow on the product label and allow it to hang
about 10 cm/3,9 inch over the front edge of the cushion.
NOTE! Place OneWaySlide according to instructions on product label. Incorrect placement
may entail a risk of the patient sliding out of the chair.
Using OneWaySlide
If the patient slides forward in the wheelchair, the caregiver
can help them to lean forward and provide counter pressure,
thereby enabling the patient to slide back in the chair.
Make sure the knees are raised to the same level as the hips.
This can be done with the aid of a FootStool.
Material:
Polyester, polyamide, cotton
Care of the product:
Read the product label.
Do not use rinsing agent. To ensure
maximum material life, hang dry or tumble
dry on low heat.
4
Medical Device Class I
The product meets the requirements of the Medical Devices
Directive 93/42/EEC.
Contact your local distributor if you have any questions
about the product and its use. See www.handicare.com
for a complete list of distributors. Always make sure that
you have the right version of the manual. The most recent
editions of manuals are available for downloading from our
website, www.handicare.com.
SystemRoMedic
M A N U A L
TM