CEMO ECO Manual De Instrucciones página 4

GB
Content
1. General
2. Technical data
3. Commissioning
4. Environmental factors
5. Accessories / Spare parts
6. Maintenance
7. Warranty
4
1. General
The proper intended use for the boot cleaner
ECO is to clean dirty footwear (boots).
The maximum water temperature may not exceed
40 °C.
2. Technical data
Dimensions L x W x H: 327 x 277 x 813 mm
Weight: 5,6 kg
Connector for ½ in hose
3 stationery brushes
Stainless steel lines
with handle
3. Commissioning
The boot cleaner ECO should be installed on a
level, non-slip surface.
The ECO boot cleaner can be secured to the floor
to prevent slipping by using four bolts. Four holes
are provided at the bottom for this purpose.
The connection is made via a water hose which is
connected with a ½" quick-coupling (not included
in the scope of delivery). The ½" quick-coupling is
pushed onto the ½" water connection.
hose ½"
quick-coupling
½"
water connection
½"