Status/Error/Warning Message
ENCRYPTION! (cont'd)
SYNC Messages
WRONG DEVICE
ERROR DEVICE
TIMEOUT
11 Troubleshooting
-
Check transmitter frequencies.
• RF input power too high.
-
Use CLA switch bank on the PS 4000 W to reduce the RF signal level. Refer to
section 3.6 in the PS 4000 W user manual or visit www.akg. com (DMS 700
Multichannel System Setup Guide).
• Transmitter frequency band does not match the receiver's frequency band.
• Error in transmitter ID data.
-
If the problem occurs frequently, contact your AKG Service Center.
• No infrared data detected.
DMS
700
Problem / Remedy
Problem / Remedy
27