Safety Instructions; How To Assemble; How To Operate - TZS First AUSTRIA FA-5546-3 Manual De Instrucciones

Ocultar thumbs Ver también para FA-5546-3:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
OPERATION INSTRUCTIONS
! WARNING
To prevent accidents and machine damage, read
these instructions before installation and use.

SAFETY INSTRUCTIONS

THIS CLEANER IS INTENDED FOR HOUSEHOLD
USE ONLY.
IMPORTANT SAFETY INSTRUCTIONS
When you use an appliance, basic precautions
should always be followed, including the
following:
1. READ ALL INSTRUCTIONS BEFORE USING THE
APPLIANCE.
2. ALWAYS FOLLOW THESE SAFETY
INSTRUCTIONS.
3. BRING CLEANER TO UPRIGHT POSITION
WHEN USING THE HOSE AND ATTACHMENTS.
4. DO NOT LEAVE CLEANER UNATTENDED
5. REGULARLY CHECK THE FILTER TO CLEAN OR
REPLANCE.
6. WARNING: DO NOT USE SHARP OBJECTS TO
CLEAN OUT THE HOSE SINCE THEY COULD
CAUSE DAMAGE.
7. OCCASIONALLY REMOVE BRUSH AND CLEAN
DEBRIS FROM END CAPS TO KEEP BRUSH
ROTAING SMOOTHLY.
IMPORTANT SAFETY INSTRUCTIONS WHEN
PLUGGED IN. READ ALL INSTRUCTIONS BEFORE
USING THE APPLIANCE.
WARNING: TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR INJURY:
1. Do not leave appliance when plugged in.
Unplug from outlet when not in use and
before servicing.
2. Do not allow to be used as a toy. Close
attention is necessary when used by or near
child.
3. Use only as described in this manual.
Use only manufacture's recommended
attachments.
4. Do not use with damaged cord oy plug. If
appliance is not working as it should, has
been dropped, damaged, left outdoors, or
dropped into water, return it to a service
center for inspection.
5. Do not pull or carry by cord, use cord as
handle, close a door on cord, or pull cord
around shape edges or corners. Do not
run appliance over cord. Keep cord away
from heated surface.
6. Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
7. Do not handle plug or appliance with wet
hands.
8. Do not put any object into openings. Do not
use with any opening blocked; keep free of
dust, lint, hair, and anything that may reduce
air flow.
9. Keep hair, loose clothing, fingers, and all
parts of body away from openings and
moving parts.
10. Do not pick up anything that is burning or
smoking, such as cigarettes, matches, or hot
ashes.
11. Turn off all controls before unplugging.
12. Use with extra care when cleaning on stairs.
13. Do not use to pick up flammable or
combustible liquids, such as gasoline, or use
in area where they may be present.
14. Keep the vacuum cleaner on the floor. Only
the hand-held vacuum cleaners may be set
on furniture.
15. Do not use an extension cord with this
vacuum cleaner.
16. Store the vacuum cleaner indoors. Put the
vacuum cleaner away after use to present
tripping accidents.
17. Using improper voltage may result in
damage to the motor and possible injury
to the user. Proper voltage is listed on the
cleaner plate.
18. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
19. Children should be supervised to ensure that
they do not play with the appliance.
20. If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
*NOT AVAILABLE ON ALL MODELS.
Correct Disposal of this product
This marking indicates that this product
should not be disposed with other
household wastes throughout the EU.
To prevent possible harm to the
environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources.
To return your used device, please use the return
and collection systems or contact the retailer
where the product was purchased. They can take
this product for environmental safe recycling.
2
FEATURES
(Refer to Fig. A)
1. Dust Brush
2. Crevice Tool
3. Floor Brush
4. Adjustable Tube
5. Hook
6. Curved Tube
7. Handle
8. Main Body
9. Hose Inserter
10. Barrel
11. Base
12. Wheel
13. Buckle Assembly
14. Clapboard Assembly
15. Power Switch
16. Hose

HOW TO ASSEMBLE

1. Release the buckle and remove the main
body. (Refer to Fig. 1)
2. Lift the Clapboard Assembly and unpack the
wheel and attachment from the Barrel (Refer
to Fig. 2)
3. Insert these wheels into the hole of base in
turn, then press down and make sure the
wheel are firm (Refer to Fig. 3)
4. Put down the clapboard assembly. (Refer to
Fig. 4)
5. Insert 1 of the main body into 2 of barrel,
and then lock the buckle. (Refer to Fig. 5)
6. Insert hose inserter of the hose assembly
into barrel or 1 of main body, then gently
rotate to the right ; and make sure they are
fitted tightly. (Refer to Fig. 6)
CAUTION:
#1 of main body is used to blowing.
7. Insert adjustable tube into hook, and adjust
it to the proper location, then fit it with
screw. (Refer to Fig. 7)
8. Insert curved Tube of the hose assembly
into adjustable tube; and make sure the
connection is firm. (Refer to Fig. 8)
9. Insert the extention tube into floor brush;
and make sure the connection is firm. (Refer
to Fig. 9)

HOW TO OPERATE

WARNING: FULLY ASSEMBLE CLEANER
BEFORE OPERATING.
On/off switch
Turn on/off the unit by pressing the power
switch on the top of it.
Caution: Before using the vacuum cleaner to
load 2.5 liters of water. (Refer to Fig. 10)
Air Flow Control
Adjust the suction by adjusting the pusher up
and down.
Caution: stop the cleaner and cut off the power
supply before change the accessories. (Refer to
Fig. 11)
Usage of floor brush
The floor brush can be used for cleaning carpet
and floor. Adjust the duty of the brush by
pressing the relative button. When the floor
nozzle extends out brush, it is for bare floor, if
without, for carpet. (Refer to Fig.12)
CAUTION:
The vacuum cleaner can suck both water and
dust. The vacuum cleaner won't run, when the
water in the barrel is full.
Usage of adjustable tube
Adjust the tube to a proper length by pushing
the control button; and the tube will be lock
automatically after releasing the button. (Refer
to Fig. 13)
DUST EMPTY AND MAINTENANCE
1. Release the buckle and remove the main
body and clapboard assembly. (Refer to Fig.
14)
2. Pour out the sewage and rinse the barrel
under water. (Refer to Fig. 15)
CAUTION:
Remove the hose assembly before releasing
the buckle assembly.
The filter should be cleaned twice a year. Or
if it is visibly dusty, clean it at once.
Never use this appliance without filter.
Replace the filter once it is damaged.
Never clean the filter with washing machine.
3. Take out the sponges and cyclone-bulder
from the clapboard, and then rinse them in
water. (Refer to Fig. 16)
4. Take out the cyclone-bulder from the
clapboard assembly, and then rinse them
under water. (Refer to Fig. 17)
5. Take out the filter from the main body
Assembly, and then cleaning in water and let
dry naturaly. (Refer to Fig. 18)
STORAGE
1. Wind the power cord around the main body.
(Refer to Fig. 19)
2. Insert the hook of a adjustable Tube into
main body. (Refer to Fig. 19).
3. Insert the dust brush and crevice tool into
base. (Refer to Fig. 19).
3

Publicidad

Tabla de contenido
loading

Tabla de contenido