TFK dot 2 Instrucciones De Uso página 10

-(Fig.VIII) The hood is attached to the frame by two sliding catches
(12). In addition, you can attach the canopy to the backrest with
snap fasteners.
-(Fig.IX) Close the belt buckle (15) by audibly snapping the two clips
(14 and 16) into the belt buckle (15). To open, simply press the button
in the middle of the holder (15). The five individual straps can be
adjusted to your child's size using the a, b and c tightening systems.
The belt is fastened at the 5 points a, b, c.
Transport
-(Fig.X) When the trolley has been folded together, you can carry it
by the handle (17).
-(Fig.XI) To mount the Group 0 seat, first remove the bumper bar as
shown in Fig.5. Then insert the adapters on both sides. As a second
securing measure, close the securing clip (19) on the frame. The
Group 0 seat can now be pushed onto the adapters (18) from
above.
In order to fold the trolley together, the adapter must first be
dismantled!
Fig. XI corresponds to adapter for Maxicosi. A current overview of the
suitable car seats and adapters can be found on our homepage:
www.tfk-buggy.com
-(Fig.XII) Carriage complete