Leister LHS 210 Manual Del Usuario página 19

Declaration of Incorporation
Declaration of Incorporation issued in accordance with machinery directive 2006/42/EC, Appendix II B
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil / Switzerland hereby declares that for this
partly completed machinery
• The following essential requirements have been applied and complied with:
1.1.1, 1.1.3, 1.1.5, 1.3.2, 1.3.4, 1.5.1, 1.5.2, 1.6.3, 1.7.1, 1.7.3
• Technical documentation is drafted in compliance with Appendix VII B.
• Before the air heater is put into operation, the machine into which it is to be installed in, must comply with the
stipulations of the machinery directive.
• The relevant information concerning this air heater will be available in the event of a motivated request from
national authorities.
• In addition, the following EU-directives have been complied with: 2011/65/EU, 2014/30/EU
• The following standards have been applied: EN ISO 12100, EN 60335-1, EN 60335-2-45, EN 55014-1,
EN 55014-2, EN 61000-3-2, EN 61000-3-3, EN IEC 63000
Kaegiswil, 07.01.2021
Bruno von Wyl, CTO
Declaration of Incorporation issued in accordance with The Supply of Machinery (Safety) Regulations 2008,
Appendix II B
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil / Switzerland hereby declares that for this
partly completed machinery
• The following essential health and safety requirements have been applied and complied with:
1.1.1, 1.1.3, 1.1.5, 1.3.2, 1.3.4, 1.5.1, 1.5.2, 1.6.3, 1.7.1, 1.7.3
• Technical documentation is drafted in compliance with Appendix VII B.
• Before the air heater is put into operation, the machine into which it is to be installed in, must comply with the
stipulations of the The Supply of Machinery (Safety) Regulations 2008.
• The relevant information concerning this air heater will be available in the event of a motivated request from
national authorities.
• In addition, the following UK Statutory Instruments have been complied with: 2012 No. 3032, 2016 No. 1091
• The following standards have been applied: BS EN ISO 12100, BS EN 60335-1, BS EN 60335-2-45,
BS EN 55014-1, BS EN 55014-2, BS EN 61000-3-2, BS EN 61000-3-3, BS EN IEC 63000
Kaegiswil, 07.01.2021
Bruno von Wyl, CTO
Christoph Baumgartner, GM
Christoph Baumgartner, GM
19