Troubleshooting Connections - SonoSite SiteStand Manual Do Usuário

Troubleshooting Connections

Symptom
External display does not
show an image.
External display does not
project sound.
VCR does not record.
VCR does not play back.
Print does not work.
18
Chapter 3: Using the Accessories
Solution
• Check the video format setting in system setup. (See System
User Guide.)
• Check the cable connections on display and stand. (See
page 15 or page 16.)
• Check the display to ensure that it is turned on and set up
properly (i.e., ready to show correct video format: S-video,
composite, or RGB). See the display manufacturers'
instructions, if necessary.
• Check that sleeve is closed. (See
SiteStand:" on page 7.)
• Check the cable connections on display, stand, and VCR. (See
page 15 or page 16.)
• Check that sleeve is closed. (See
SiteStand:" on page 7.)
• Check the video format setting in system setup, including
Print/VCR key setting. (See System User Guide.)
• Check the cable connections on stand and VCR. (See
• Check the VCR to ensure that it is turned on and set up properly.
(See the VCR manufacturers' instructions, if necessary.)
• Check that sleeve is closed. (See
SiteStand:" on page 7.)
• Check the cable connections on display, stand, and VCR. (See
page 15 or page 16.)
• Check the display setting to ensure that it is set to S-video. Press
the +/- key to toggle video format on the display (default
setting is Composite).
• Check that sleeve is closed. (See
SiteStand:" on page 7.)
• Check the printer selection in system setup. (See System User
Guide.)
• Check the cable connections. (See
• Check the printer to ensure that it is turned on and setup
properly. (See the printer manufacturer's instructions, if
necessary.)
• Check that sleeve is closed. (See
SiteStand:" on page 7.)
"To insert the system into the
"To insert the system into the
page 15.)
"To insert the system into the
"To insert the system into the
page 15 or page 16.)
"To insert the system into the