Safety Notes; Product Description And Specifica-Tions - Yamato MICRO Manual De Instrucciones

cod. 95056-91843-91844-91846-91847

Safety Notes

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
• Do not allow persons unfamiliar with the Glue gun or the instructions to operate the device.
• This Glue gun can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the Glue gun in a safe way and understand the hazards involved. Other-wise,
there is danger of operating errors and injuries.
• Supervise children. This will ensure that children do not play with the Glue gun or the charger.
• Cleaning and user maintenance of the Glue gun or the battery charger shall not be made by children
without supervision.
• Before each use, check the Glue gun, cable and plug. If damage is detected, do not use the glue gun.
Never open the glue gun by yourself, and have repairs carried out only by a qualified repair person using
only identical replacement parts. Damaged glue guns, cables and plugs increase the risk of an electric
shock.
• Do not leave the switched on Glue gun unattended.
Protect the Glue gun against heat, e.g., against continuous intense sunlight, fire, water, and moisture.
• Do not touch the hot nozzle and the silicone cap. Danger of burns.
• After use,place down the Glue gun in a safe manner and allow it to cool down completely before packing
it away. The hot nozzle can cause damage and/or burns.

Product Description and Specifica-tions

Intended Use
The glue gun is intended for the quick gluing of clean, dry and grease-free materials with hot-melt adhesives.
Used to glue textiles, foam, plastics,(except PE,PP,PTFE,Styropor and soft PVC), ceramics, porcelain, metal, glass
and stone.
Technical Data
Codice
Gluing temperature
Glue stick, diameter
Power
Operation
Switching On
Observe the mains voltage! The voltage of the power source must correspond with the data on the type plate of
the machine. Glue guns marked with 230 V can also be operated with 220 V.
To start the operation of the glue gun, insert the mains plug into the socket outlet.
Allow the glue gun to heat up for approx. some minutes before beginning to work. For this, position the glue
gun on the support stand.
To switch off the glue gun, pull the mains plug out of the socket outlet.
When not using the power tool, pull the mains plug in order to save energy.
Warning
Do not allow the hot glue or the nozzle tip to come into contact with persons or animals. Glue and nozzle tip
reach a temperature of approx. 170/190℃；danger of burning. If hot glue comes into contact with the skin,
hold the affected area immediately under a stream of cold water for several minutes. Do not try to remove the
ENGLISH
95056 91843
165° 165°
Ø 7-7,5 mm Ø 7-7,5 mm
20W 20W
91844 91846
193° 193°
Ø 11-11,5 mm Ø 11-11,5 mm
55W 80W
91847
193°
Ø 11-11,5 mm
100W