Key Menu - Coffee Selection; Key Menu - Cappuccino Selection - LaCimbali S39 Dolcevita 2 Guía De Uso E Instalación

Exiting the programming menu
Machines WITH the OK key
there are two possibilities:
1) Press the OK
2) Press the RES (24) key to leave settings unchanged
and exit the menu
If the "Customer Progr." is set to "NO", the following
message will appear on the display:
Press one of the coffee dispensing keys (32) (the relative
led will remain on). The following message will appear on
the display:
KEY MENU
Type
repetition
Water dose
MM1 cof, dose
MM2 cof, dose
(it represents the number of distributions of
(volumetric dosage pulses, from 0 to 1999,
... (coffee dose grinde ...impulses, 0 ÷ 200
(volumetric dosage pulses, from 0 to 1999,
the color of the LEDs during dispensing,
000 - 015).
Press one of the cappuccino dispensing keys (32) (the
relative led will remain on). The following message will
appear on the display:
KEY MENU
Type
repetition
Milk dose
Emulsion
Cold milk dose
The following cappuccino selection parameters can be
(it represents the number of distributions of
(milk dispensing time: 0 ÷ 60 seconds, with
((foamed milk dispensing time, from 0 to 60,

23. Key menu - Coffee selection

+
1 coffee
001
110
043
000

24. Key menu - Cappuccino selection

+
1 cappuccino
001
04.0
03.0
05.0
24 EN
CUSTOMER PROG.
NOT ENABLED!
The components - * - are applied only in some produit
The dose for making a cup of coffee can be composed of
grounds taken from both hoppers, which has the advantage
of less time needed for grinding.
10 of the value set in the technical programming menu.
Example
technical programming
coffee dose MM1 045
coffee dose MM2 020
(volumetric dosage pulses, from 0 to 1999,
... (coffee dose grinde ...impulses, 0 ÷ 200
(volumetric dosage pulses, from 0 to 1999,
the color of the LEDs during dispensing,
000 - 015).
The components - * - are applied only in some produit
The dose for making a cup of coffee can be composed of
grounds taken from both hoppers, which has the advantage
of less time needed for grinding.
10 of the value set in the technical programming menu.
customer programming
coffee dose MM1 035÷055
coffee dose MM2 010÷030
+
+