Publicidad
Idiomas disponibles
Idiomas disponibles
From the 18-pin harness:
• Connect the Yellow RCA labeled (1) to either a backup camera
(sold separately), or a video source.
• Connect the Yellow RCA labeled (2) to either a backup camera
(sold separately), or a video source.
Note: It does not matter what RCA you use as they are programmable.
• Plug the 18-pin harness into the interface.
Note: The following wires on the 18 pin harness are not used in this application.
Purple • Purple/Black • Green • Green/Black
99-6520B
Connections to be made
From the 22-pin harness to the aftermarket radio:
• Connect the Yellow wire to the battery or memory wire.
• Connect the Black wire to the ground wire.
• Connect the White wire to the left front positive speaker output.
• Connect the White/Black wire to the left front negative speaker output.
• Connect the Gray wire to the right front positive speaker output.
• Connect the Gray/Black wire to the right front negative speaker output.
• Connect the Green wire to the left rear positive speaker output.
• Connect the Green/Black wire to the left rear negative speaker output.
• Connect the Purple wire to the right rear positive speaker output.
• Connect the Purple/Black wire to the right rear negative speaker output.
• Plug the 22-pin harness into the interface.
From the 12-pin harness to the aftermarket radio:
• The 12-pin harness is to be used in conjunction with the optional ASWC-1
(not included) to retain steering wheel controls. If the ASWC-1 is not being used,
disregard this harness. If it will be used, please refer to the ASWC-1
instructions for programming.
Note: The white 40-pin harness from the factory must be connected to
the 99-6520B for the climate to function. We have included a 40-pin
extension cable to ease in installation.
7
Publicidad
