Installation instructions for part 99-6525
Chrysler 300 2011-2014
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Integrated buttons and included interface for climate functions
• Painted matte black (99-6525B)
or high gloss black (99-6525HG)
KIT COMPONENTS
• A) Radio trim panel with climate controls • B) Radio brackets • C) Lower support bracket • D) Pocket • E) (2) Metal panel clips
• F) (2) Plastic panel clips • G) (2) #8 x 3/8" Phillips pan-head screws • H) (2) #8 x 1/2" Phillips countersunk flat-head screws
• Climate extension cable (not shown) • Axxess interface and wiring harness (not shown)
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • Included Antenna Adapter: • 40-EU10
METRA. The World's best kits.
(with a 8" screen)
99-6525
C
D
metraonline.com
™
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
– ISO DDIN radio provision ...................................... 4
Axxess interface installation ..............................5-6
Screen Operation ................................................... 7
Updating the 99-6525 ............................................ 8
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• T-30 Torx driver
F
CAUTION: Metra recommends disconnecting the negative battery
E
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
G
H
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
Table of Contents
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION