Installing The Car Seat; Adjusting The Support Leg - Foppa Pedretti Logik I-Size Manual De Instrucciones

INSTALLING THE CAR SEAT IN THE VEHICLE

INSTALLING THE CAR SEAT

1
Fold down the "support leg" until it locks into position (1).
Pull the ISOFIX connector extension strap (2), which is located on the front of the car
seat, between the seat and the base. Both ISOFIX connectors (3) will automatically
extend. Place the car seat on the passenger seat of the car, insert the two ISOFIX
connectors into the appropriate guides, and push to attach the two connectors to the
ISOFIX hooks in the vehicle. You will hear a "click" once they have attached. Check that
the ISOFIX attachment indicators are green on both sides (5).
Make sure there is no space between the backrest of the passenger seat and the car
seat. If necessary, pull the connector extension strap and push the car seat towards the
passenger seat backrest.

ADJUSTING THE SUPPORT LEG

10
WARNING: Do not place the front support leg on a storage compartment located on
the floor of the vehicle. The support leg must rest on a stable and secure surface on
the floor of the vehicle.
WARNING: Make sure that the support leg does not lift the car seat up from the vehicle
seat.
• ENGLISH •
3 5
8
9
7
Fold down the "support leg" until it locks
into position (8).
Press the support leg adjustment button
and lower the leg down, so that it correctly
touches the vehicle floor, then release the
button (9). The leg height adjuster must
change from red to green (10): this will
indicate that the leg is placed correctly.
Check that the support leg is positioned
10
and adjusted correctly.
35