Removing The Car Seat; Inclining The Car Seat - Foppa Pedretti Logik I-Size Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 64
• ENGLISH •
USING THE CAR SEAT IN THE VEHICLE

REMOVING THE CAR SEAT

3
54
3
54
1
8
9
Press both ISOFIX release buttons (4) in the direction shown in the figure.
The ISOFIX indicator will turn red.
Pull the ISOFIX connector extension strap (2) and, at the same time, slide the connectors
along the car seat frame to retract them inside the base, then release the strap.
Press the button (9) and lift up the support leg (1) until it locks.
Fold up the support leg under the base (8).
CAR SEAT ADJUSTMENT SYSTEM

Inclining the car seat

Press the reclining handle, located on the front part of the seat, and adjust the seat
to the position desired. Release the handle, making sure that the seat is locked in the
chosen position.
IMPORTANTE: In the forward-facing position (76 to 105 cm), there are three tilt
positions marked in red.
In the rear-facing position (from 40 to 105 cm), for children up to approximately 4 years
of age, the seat must only be tilted in the most reclined position (horizontal), which is
marked by the blue colour.
36

Publicidad

Tabla de contenido
loading

Tabla de contenido