Hydrofarm Phantom Ballast Manual De Instrucciones página 2

INSTRUCTION MANUAL
THE PHANTOM BALLAST
COMMERCIAL DE
for efficient growing. It was created with state-
of-the-art microprocessor technology to utilize
the industry's double-ended 1000W HPS lamps.
It operates on a 240V, 50/60 Hz power supply.
WARNINGS
• Use this ballast in greenhouses or indoor
applications only. Position it in an area away
from excessive heat or contact with liquids.
• This ballast does not rely on the luminaire
enclosure for protection against accidental
contact with live parts.
ELECTRICAL SPECIFICATIONS
Main Operating Voltage
Model
Voltage
PHB3015 240V 215-265V
INPUT AMPERAGE REFERENCE
Imax Super Boost
Model
240v
PHB3015 5.2
BALLAST LED STATUS INDICATORS
STATUS
Warm Up
Normal Operation
Stand By
Ballast Fault
Lamp Fault
End of Life Lamp Indicator
Connection Error
High Impact Voltage
Low Impact Voltage
Over Temperature
2
is an ideal ballast choice
Max Input
Range Power
1224W
100% 75%
240v 240v 240v
5.1 4.4 3.4
• For remote operations, use this ballast with a
maximum lamp cord of 30 feet.
• Disconnect the ballast from the power supply
before performing any maintenance, lamp
changes, or other modifications.
• Contact the retailer or distributor for service
if the ballast does not work after confirming
the power connection, output connection,
and bulb operation.
• Opening the ballast will void the warranty.
• Lamps with built-in ignitors will not work
with this ballast. Not for use with external
ignitors.
ALWAYS DISCONNECT BALLAST'S
POWER CORD BEFORE MOVING
THE UNIT OR CHANGING LAMPS.
Power
Output Power Settings
Factor
Super/100%/75%/60% > 0.98
60%
240v
2.7
DIMMING BUTTON
On
On
Slow Flash
Off
Off
Rapid Flash
Flash x 1
Flash x 2
Flash x 3
Flash x 4
Ignitor
THD CF
Voltage
4.0 KV < 8% 1.414-1.6 40°C/104°F
SELECTED POWER LED
Slow Flash
On
Slow Flash
Off
Rapid Flash
Off
Off
On
On
On
ta tc
70°C/158°F