Working Advice - Bosch AFS 23-37 Manual Original

OBJ_BUCH-2432-003.book Page 17 Monday, December 7, 2015 9:50 AM
Equipment category: 33
Notified body:
DEKRA Certification B.V.
Meander 1051
6825 MJ Arnhem
Netherlands
Nr. 0344
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-HG/ENS-PA2,
Stowmarket, Suffolk IP14 1EY, England
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
07.12.2015
Mounting and Operation
 Do not connect the machine to the mains socket before
it is completely assembled.
 The cutting head continues to rotate for a few seconds
after the brushcutter is switched off. Allow the cutting
head to stop rotating before switching "on" again.
 Do not rapidly switch off and on.
 Remove any grass from cutting head cover when
changing cutting head.
 Only use Bosch approved cutting elements. Cutting
performance will vary with different cutting elements.
The numbering of the figures refer to the illustrations of the
machine on the graphics page.
Action
Delivery scope
Mounting the blade guard
Troubleshooting
Problem Possible Cause
Machine fails to operate Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Thermal cut out
Bosch Power Tools
Action
Connecting the shaft
Attaching the blade
Mounting the fixed line head and the
cutting line
Mounting the barrier/operating ad-
vice for right-handers
Mounting the barrier/operating ad-
vice for left-handers
Attaching the shoulder strap
Adjusting handle length
Connecting the extension lead
Switching on and off

Working advice

Cleaning
Cutting line storage
Selecting accessories
Working Advice
Usage application area
Clearing brambles/brush
Cutting saplings
Trimming/thinning
Clearing weeds
Cutting long grass
Figure Page
Clearing nettles
1 248
2 249
Figure
3
4
5
6
7
8
9
10
11
12
13
14
Cutting system
blade
blade
line
line/blade
line
line/blade
Corrective Action
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Allow tool to cool and try again
F 016 L81 230 | (7.12.15)
English | 17
Page
249
250
251
252
252
253
253
254
254
255
256
256