Symbols And Annunciators; Operation - ADInstruments True RMS AD-9962 Manual De Usuario

_______________________________________________________________________________
Equipment protected throughout by Double Insulation
(Class II)
Equipment complies with current EU directives.

SYMBOLS AND ANNUNCIATORS

))) Continuity
Low Battery
Diode test
HOLD Data Hold
AUTO AutoRanging
AC Alternating Current or Voltage
DC Direct Current or Voltage
V Volts
A, mA,uA Current range

OPERATION

To turn on the instrument turn the range knob from the OFF position to any
measurement range.
Note:
For best battery life ALWAYS turn the function switch to the OFF position when the
meter is not in use. This meter has Auto OFF that automatically shuts the meter OFF if
30 minutes elapse between uses.
NOTE: On some low AC and DC voltage ranges, with the test leads not connected to a
device, the display may show a random, changing reading. This is normal and is
caused by the high-input sensitivity. The reading will stabilize and give a proper
measurement when connected to a circuit.
MODE button
To select AC or DC measurement when in Voltages, Amps, mA , uA ,Ω,
)))，CAP，Hz,% .
HOLD
HOLD key is the reading hold control key that acts with trigger . The function is to hold
the display of reading/backlight control . To press the key ,the display value will be
©Copyright Abacanto Digital SA.
Manual de usuario AD-9962
AD Instruments
,
18