Installation
6.2
Notes on installation
!
WARNING! Electrocution hazard
• Detach all connections to battery before starting installation of parking
cooler.
• Make sure that all electrical components are electrically discharged before
carrying out work on them!
!
CAUTION! Health hazard
Improper installation of the parking cooler can result in irreparable damage to
the device and put the safety of the user at risk.
The manufacturer will not be held liable for claims if the parking cooler is not
installed according to this installation manual. That applies to malfunctions and
the safety of the air conditioning roof unit, in particular to injuries and damage
to property.
A
NOTICE! Damage hazard
The manufacturer only assumes liability for parts included in the scope of
delivery. The validity of the warranty expires if the system is installed together
with third-party parts.
I
NOTE
• The manufacturer strongly recommends the use of a vehicle-specific
fastening frame for an optimum installation procedure for the compressor
unit on the rear panel of the cab.
• After installing the unit, the specified parameters of the unit software must
be checked (refer to the installation instructions of the evaporator unit).
You should always read this installation manual all the way through before
installing the parking cooler.
8
CoolAir SP950C/SPX1200C
EN