Additional Notes - SteelSeries STRATUS XL Manual De Instrucciones

ADDITIONAL NOTES

The Stratus XL will remember the last paired iOS Device. When you reset the power on the Stratus XL, it will automatically connect to the
last paired iOS device.
If you are already connected to an iOS device and want to change the device that you're playing on, there are two ways to do this, as follows:
1. If you want to erase the history of all the devices stored on your controller, hold down the pairing button on the back of the controller
for 5 seconds. The LED's should blink 1 and 3 followed by 2 and 4. This means that all of the history stored in the controller has been
erased, it will enter pairing mode, and it will search for new iOS Devices (refer to the image below).
[NOTE: We highly recommend option #1 over option #2]
2. If you want the controller to enter "pairing mode" without erasing prior history, press the pairing button for 2 seconds. The LED's should
blink 1 and 2 followed by 3 and 4. This means that the controller is in pairing mode and will search for new devices (refer to the image below).
Please go to www.steelseries.com/stratusXL/faq for more detailed product information.
4