Additional Notes - SteelSeries STRATUS Manual De Instrucciones

INITIALIZATION
1. Turn on controller
2. LEDs will light up solid for the first five seconds, indicating battery life as follows:
3. All four LEDs will flash ON and OFF evenly when the Controller is not paired.
4. To pair the Controller, go to your iOS device and follow the User Interface flow below:
Settings > Turn On Bluetooth > Search for new Devices
"SteelSeries Stratus" will display on the screen. Click to Connect via Bluetooth
5. If the Controller has paired successfully, the LEDs will flash ON and OFF unevenly (rapidly).
6. If the Controller is paired and the user starts a game, one of the four LEDs will light up solid, depending on the player number (1-4)
assigned.
7. When the Controller battery charge gets low (~20 minutes remaining), the LEDs will start flashing continuously for 5 seconds, even if
in game mode. This behavior will keep repeating until the battery charge increases to 10%.
3
ON
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.

ADDITIONAL NOTES

The Stratus will remember the last paired iOS Device. When you reset the power on the Stratus, it will automatically connect to the last
paired iOS device.
If you are already connected to an iOS device and want to change the device that you're playing on, there are two ways to do this, as follows:
1. If you want to erase the history of all the devices stored on your controller, hold down the pairing button on the back of the controller
for 5 seconds. The LED's should blink 1 and 3 followed by 2 and 4. This means that all of the history stored in the controller has been
erased, it will enter pairing mode, and it will search for new iOS Devices (refer to the image below).
2. If you want the controller to enter "pairing mode" without erasing prior history, press the pairing button for 2 seconds. The LED's
should blink 1 and 2 followed by 3 and 4. This means that the controller is in pairing mode and will search for new devices (refer to
the image below).
Please go to www.steelseries.com/stratus/faq for more detailed product information.
When the USB Cable is connected, the LED's will blink in a distinct manner to indicate that the device is charging.
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
TWO PLACE DECIMAL
THREE PLACE DECIMAL
DIMENSIONS ARE IN INCHES
MATERIAL
TOLERANCES:
DRAWN
FRACTIONAL ±
FINISH
NEXT ASSY USED ON
CHECKED
ANGULAR: MACH ± BEND ±
TWO PLACE DECIMAL
±
ENG APPR.
DO NOT SCALE DRAWING
APPLICATION
NAME DATE
DRAWN
±
CHECKED
BEND ±
±
± ENG APPR.
±
MFG APPR.
NAME DATE
Q.A.
COMMENTS:
SIZE
apple_controller-11
A
4
DWG. NO.