Symbols Used In This Manual; Important Safety Instructions; Keys And Buttons Used In This Manual - Canon Color imageCLASS MF8350Cdn Guía De Inicio

1 2
Preface Installing the Machine

Symbols Used in This Manual

The following symbols are used in this manual to explain procedures, restrictions,
handling precautions, and instructions that should be observed for safety.
WARNING
Indicates a warning concerning operations that may lead to death or injury to
persons if not performed correctly. To use the machine safely, always pay attention
to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to persons if
not performed correctly. To use the machine safely, always pay attention to these
cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read these items
carefully to operate the machine correctly, and avoid damage to the machine or
property.
NOTE
Indicates a clarification of an operation, or contains additional explanations for a
procedure. Reading these notes is highly recommended.

Keys and buttons used in this manual

The following symbols and key names are a few examples of how keys to be pressed
are expressed in this manual.
• Operation panel keys: [Key icon] + (Key name)
Example: [ ] (Stop)
• Display: <Apply>
• Buttons and items on the computer display: [Control Panel]
3
Configuring and Connecting the Fax
Please read these "Important Safety Instructions" thoroughly before operating the
machine.
As these instructions are intended to prevent injury to the user and other persons or
destruction of property, always pay attention to these instructions and operational
requirements.
Also, as it may result in unexpected accidents or injuries, do not perform any
operation unless otherwise specified in the manual.
Installation
•
•
•
•
•
•
•
•
•
4
Connecting to a Computer and
Installing the Drivers

Important Safety Instructions

WARNING
Do not install the machine in a location near alcohol, paint thinner, or other
flammable substances. If flammable substances come into contact with electrical
parts inside the machine, this may result in a fire or electrical shock.
Do not place the following items on the machine.
If these items come into contact with a high-voltage area inside the machine, this
may result in a fire or electrical shock.
If these items are dropped or spilled inside the machine, immediately turn off the
power switches of the machine and computer () and disconnect the interface
cable if it is connected (2). Then, unplug the power plug from the AC power outlet
(3) and contact your local authorized Canon dealer.
- Necklaces and other metal objects
- Cups, vases, flowerpots, and other containers filled with water or liquids
(1)
When installing and removing the optional accessories, be sure to turn the
machine off, unplug the power plug, and then disconnect all the interface cables
and power cord from the machine. Otherwise, the power cord or interface cables
may be damaged, resulting in a fire or electrical shock.
CAUTION
Do not install the machine in unstable locations, such as on unsteady platforms
or inclined floors, or in locations subject to excessive vibrations, as this may cause
the machine to fall or tip over, resulting in personal injury.
The ventilation slots are provided for proper ventilation of working parts inside
the machine. Never place the machine on a soft surface, such as a bed, sofa, or
rug. Blocking the slots can cause the machine to overheat, resulting in a fire.
Do not install the machine in the following locations, as this may result in a fire or
electrical shock.
- A damp or dusty location
- A location exposed to smoke and steam, such as near a cookery or humidifier
- A location exposed to rain or snow
- A location near a water faucet or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
When installing the machine, gently lower the machine to the installation site so
as not to catch your hands between the machine and the floor or between the
machine and other equipment, as this may result in personal injury.
When connecting the interface cable, connect it properly by following the
instructions in this manual. If not connected properly, this may result in
malfunction or electrical shock.
When moving the machine, follow the instructions in this manual to hold it
correctly. Failure to do so may cause you to drop the machine, resulting in
personal injury.
e-Manual "Transporting the Machine"
Appendix
(2)
(2)
(3)
(1)
7