Residual Risks; Package Contents - BTI PROLINE PS 1800 Instrucciones De Manejo

E N G L I S H
- Ensure that the local extraction as well as hoods,
baffl es and chutes are properly adjusted.
• Operator shall be instructed on factors infl uencing
exposure to noise (e.g., use of saw blade designed
to reduce the emitted noise, saw blade and machine
maintenance);
- Report faults in the machine, including guards
or saw blade, as soon as they are discovered;
- Provide adequate general or localized lighting;
- Ensure the operator is adequately trained in the
use, adjustment and operation of the machine;
- When fi tted with laser, no exchange with differ-
ent type of laser permitted. Repairs shall only
be carried out by the laser manufacturer or an
authorized agent.

Residual risks

The following risks are inherent to the use of saws:
- injuries caused by touching the rotating parts
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks cannot be avoided. These are:
- Impairment of hearing.
- Risk of accidents caused by the uncovered parts
of the rotating saw blade.
- Risk of injury when changing the blade.
- Risk of squeezing fi ngers when opening the
guards.
- Health hazards caused by breathing dust
developed when sawing wood, especially oak,
beech and MDF.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Carrying point.
POSITION OF DATE CODE (Fig. 2)
The date code (A5), which also contains the production
year, is stamped into the housing.
Example:
2010 XX XX
Production year
All manuals and user guides at all-guides.com

Package contents

The package contains:
1
2
1
1
2
1
1
•
•
Description (fi g. 1, 2, 9)
INTENDED USE
Your cross-cut mitre saw has been designed for profes-
sional cutting of wood, wood products and plastics. It will
perform the sawing operations of cross-cutting, bevelling
and mitring easily, accurately and safely.
DO NOT use under wet conditions or in presence of fl am-
mable liquids or gases.
This cross-cut mitre saw is a professional power tool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators
use this tool.
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
m. Mitre latch
n.
o.
p.
q.
r.
s.
t.
u.
v.
48
Partly assembled machine
Allen key 4/6 mm
216 mm TCT saw blade
Material clamp
Dust extraction nozzles
Instruction manual
Work piece clamping device
Check for damage to the tool, parts or accessories
which may have occurred during transport.
Take the time to thoroughly read and understand this
manual prior to operation.
WARNING: Never modify the power tool or any
part of it. Damage or personal injury could result.
On/off switch
Guard lock up release lever
Carrying handle
Fixed upper guard
Outer fl ange
Blade bolt
Lower blade guard
Saw blade
Sliding fence lock knob
Fixed table
kerf plate
Mitre arm
Rotating table/mitre arm
Mitre scale
Sliding fence
Dust extraction nozzle
Traverse lock
Guard lock up hook
Bevel clamp handle
Bevel scale
Bench mounting holes