Replacing The Battery - Vertiv Edge Lithium Ion Serie Manual De Instrucciones

Vertiv™ Edge UPS
Quick Installation Guide

Replacing The Battery

IMPORTANT: Before you proceed,
please review the battery safety
precautions available at https://
www.vertiv.com/
ComplianceRegulatoryInfo.
You may safely replace the internal
battery pack. See the Specifications
in the User Guide online at www.
Vertiv.com for the part number of
the replacement battery for your
UPS model number.
NOTE: Replace the battery with
the same type and number
as originally installed.
1. Removing the front panel
Remove the front bezel by pulling
firmly until the snaps release. The
Edge battery is hot-swappable and
may be replaced while the UPS is
on and plugged in. As long as the
utility power is available, power to
the outlets will remain.
2. Disconnecting the battery
wires
Disconnect the battery connector
by squeezing the ends and pulling
apart.
3. Removing the battery box
Remove the four screws and the
metal battery cover. Pull the
battery kit out.
4. Installing the new battery
Orient the connector and the new
battery in the same way as the
original battery, then slide them
into the UPS. Reinstall the metal
battery cover.
To contact Vertiv Technical Support: visit www.Vertiv.com
© 2021 Vertiv Group Corp. All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Group Corp. All other names and logos referred to are
trade names, trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Group Corp. assumes no responsibility,
and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.
4 SL-70757_REVA_03-21
5. Reconnecting the battery and
front panel
Reconnect the battery connectors.
Snap the front bezel back on.
6. Resetting battery statistics
Navigate through the menu to
Settings > Battery > Replace
Battery and confirm battery
replacement.
Edge UPS Battery Replacement
NOTE: Default Settings password is
111111.
7. Disposing of the old battery
Properly dispose of old batteries at
an appropriate recycling center or
return them to Vertiv in the packing
material for the replacement
batteries.