Página 1
C O M M U N I C A T I O N S PRODUCT INSTRUCTIONS MODEL: 24886 & 24887 Before attempting to connect or operate this product, 81-IN6207R0 please read these instructions completely.
TECHNICAL SUPPORT If technical support is needed, Axis has set-up a technical support In the event of a breach of the above warranty, Axis shall, line for their customers. at its option, repair or replace said product. This is Axis's sole obligation under this warranty.
Electrical Specifications 24886 / 24887 Class 2 Only 24VAC Tools: Philips Screwdriver, 7/16” wrench Note: DO NOT EXPOSE ENCLOSURE TO RAIN OR MOISTURE English Clase 2 Solamente 24VAC. Herramientas: Destornillador de Philips, 7/16” llave Nota: NO EXPONGA EL RECINTO A LA LLUVIA O A LA HUMEDAD Español Classe 2 Seulement 24VCA.
Página 4
To access the inside of the unit during mounting and adjusting, the lid can be temporarily propped open by using a screw driver or similar object. Open the lid of the unit with the barrel lock key. NOTE: Key is removable only when the lid is locked. •...
Página 5
Hex bolt Lock washer Flat washer Bracket O-ring Complete electrical and video connections for the camera, then attach the camera to the Attach camera, using the hardware pro- camera bracket. vided in the packet, assemble as shown. • Termine las conexiones eléctricas y video para la cámara fotográfica antes de unir la cámara fotográfica al soporte de la cámara fotográfica.
Página 6
Window shield Viewing window Star washer and hex nut (6 each) NOTE : For convenience, the extra window shields may be stored in the unit To restore the clarity of the viewing window in the event of vandalism involving spray paint or other view-blocking agents, remove the damaged shield and replace it with one of the extra shields provided.