Installation Steps; Package Contents; Recommended Tools - Axis Q60-E Serie Guia De Instalacion

Installation Guide
This Installation Guide provides instructions for installing one of the following network cameras
on your network:
• AXIS Q6042-E Mk II PTZ Dome Network Camera
• AXIS Q6044-E PTZ Dome Network Camera
• AXIS Q6045-E Mk II PTZ Dome Network Camera
For other aspects of using the product, see the User Manual available at www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 9.
2. Study the hardware overview. See page 10.
3. Study the specifications. See page 13.
4. Install the hardware. See page 14.
5. Access the product. See page 18.

Package contents

• Network camera
- AXIS Q6042-E Mk II PTZ Dome Network Camera, or
- AXIS Q6044-E PTZ Dome Network Camera, or
- AXIS Q6045-E Mk II PTZ Dome Network Camera
• Clear dome cover (premounted)
• Sunshield, including screws T20 (3x)
• RJ45 Push-pull Connector (IP66)
• Axis High PoE midspan 1-port (LPS)
• Printed materials
- Installation Guide (this document)
- Extra serial number label (2x)
- AVHS Authentication key

Recommended tools

• Torx® screwdriver T20
• Torx® screwdriver T30
• Screwdriver PH2 (to change the dome cover)
AXIS Q60-E Series
9