Manuales relacionados para Axis Communications Videolarm MOOG 21898
Resumen de contenidos para Axis Communications Videolarm MOOG 21898
- Página 1 C O M M U N I C A T I O N S PRODUCT INSTRUCTIONS MODEL: 21898 Before attempting to connect or operate this product, 81-IN6217R3 please read these instructions completely.
- Página 2 IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS 1. Read Instructions - All the safety and operating instructions should be read before the unit is operated. C AUTION 2. Retain Instructions - The safety and operating instructions R ISK OF should be retained for future reference. ELECTRIC SHOCK ! 3.
-
Página 3: Electrical Specifications
Electrical Specifications 21898 Power 24VAC Class 2 Power Supply Only Tools Required: Phillips Head Screwdriver English Ceiling Support Wires(18-24 Gauge Wire) Energía 24VAC Fuente De Alimentación De la Clase 2 Solamente Español Herramientas Requeridas: Destornillador Principal Phillips Alambre De la Galga De la Ayuda Wires(18-24 Del Techo) Puissance 24VAC Alimentation D'Énergie De la Classe 2... - Página 4 Using the provided template, mark the A box cutter or jigsaw can be used for ceiling tile for the cutout. cutting the circle. • Un cortador o un rompecabezas de la caja se • Con la plantilla proporcionada, cortar el azulejo del techo puede utilizar para cortar el círculo.
- Página 5 Support Arms Rotate Support Arms Rotate Mounting Holes Support Arm Holes With the bottom flange pressed against the ceiling, Run electrical cable into the housing rotate support arms to the outside. Tighten the support through the conduit. arm screws. • Con el fondo el reborde presionó...
-
Página 6: Mounting Plate
Axis 213 (3) #8x3/8” Mounting Plate ½" Captive Screw 1" 2" MOUNTING HOLE MOUNTING HOLE Install the camera to the mounting plate with (2) #10 screws and lock washers provided. Place (3) #8x3/8” screws on the spacers and align the mounting slots. Slide on plate and camera then secure. •... - Página 7 Axis 215 1" 1" Mounting Mounting Holes Holes 2" Install the camera to the mounting plate with (4) #8 screws and lock washers provided. Place (3) #8x3/8” screws on the spacers and align the mounting slots. Slide on plate and camera then secure. •...
- Página 8 Axis 231-232D ADD SPACERS AND SCREWS Attach the connection module as shown. Attach this assembly to the housing using This is what the typical path of illumination will look like with the setting at 30 degrees. (1) 6-32x3/8” screw and star washer. •...
- Página 9 Axis 233D Install (4) 1/2” spacers (from bracket) to base bracket. mount camera bracket and install (4) additional 1/2” spacers to camera bracket. • Instale (4) los espaciadores del 1/2"(del soporte) para basar el soporte. monte el soporte de la cámara fotográfica e instale (4) los espaciadores adicionales del 1/2"al soporte de la cámara fotográfica.
- Página 10 Reattach the trim ring/ dome assembly by pressing in and sliding (3) springs in the housing. • Reate el montaje de la bóveda del anillo del ajuste clavando y resbalando (3) los resortes en la cubierta. • Rattachez le dôme d'anneau d'équilibre en enfonçant et diapositive (3) des ressorts dans le logement. •...
-
Página 11: Replacement Parts List
Replacement Parts List 21898 Description Part Number 21898 Top housing RPMR7010 21898 support arms RPMR7020 10-24 x 2.0" SS pan head screw 90-BTSR23 7" Tinted capsule, 21898 RC7AT 6-32 Hex nut SS 91-NTHH04 #6 Star washer 92-WSTH01 21898 Spring clip 30-VL1222 21898 White trim ring RPMR7050...