Tabla de contenido
Publicidad
Kublai Series
KL06
Installation Chart
Before you begin, please make sure that you
have all components collected
1
check that all components do not have compatibility problems with each other or with the case
2
if possible, assemble the components outside the case first to make sure they are working
3
keep the motherboard manual ready for reference during installation
4
prepare a Philips screwdriver.
5
01
Loosen two screws from both left and right side panels to remove them.
Lösen Sie die beiden Schrauben an den linken und rechten Seitenwänden, nehmen Sie die Seitenwände ab.
Desserrez les vis des deux panneaux latéraux pour les retirer.
Desatornille dos tornillos de los paneles izquierdo y derecho para quitarlos.
Per rimuovere i pannelli laterali allentare, per entrambi, le due viti di serraggio.
Отвинтите по два винта, крепящих левую и правую боковых панели, и снимите панели.
取下左右側板兩顆螺絲卸下側板。
取下左右侧板两颗螺丝卸下侧板。
両方の左右パネルからネジ2本を緩めて、取り外します。
왼쪽과 오른쪽 사이드 패널에서 두 개씩 나사를 풀어 사이드 패널을 제거합니다.
4
Publicidad
Tabla de contenido
