Harness Connections - FuelTech FT INPUT Manual Do Usuário

4.2 Harness connections

Pin Wire Color
1 Red
2 White
3 Red
4 White
5 Orange #1
6 Orange #2
7 Orange #3
8 Orange #4
9 Orange #5
10 Black
11 Yellow/Blue
12 White/Red
13 Orange #6
14 Orange #7
15 Orange #8
16 Orange #9
17 Orange #10
18 Red
19 White
20 Red
21 Orange #11
22 Orange #12
23 Orange #13
24 Orange #14
25 Orange #15
26 Red
27 Green/Red
28 White
29 Green/Black
30 Orange #16
31 Orange #17
32 Orange #18
33 Orange #19
34 Orange #20
Function
Freq Input - 1
Freq Input - 2
Input #1
Input #2
Input #3
Input #4
Input #5
Battery ground
CAN LOW (-)
CAN HI (+)
Input #6
Input #7
Input #8
Input #9
Input #10
Freq Input - 3
Freq Input - 4
Input #11
Input #12
Input #13
Input #14
Input #15
12V input from relay
5V sensors
Freq Input - 4
Sensor ground
Input #16
Input #17
Input #18
Input #19
Input #20
FT Input Expander
Descriptions
Shielded Cable for RPM and Speed
Reading – Frequency 1
Shielded Cable for RPM and Speed
Reading – Frequency 2
Sensors Inputs
Must be connected directly to the
battery's negative terminal. Must not be
connected to the engine block or chassis
Connected to the CAN network of a
PowerFT ECU
Sensors Inputs
Shielded Cable for RPM and Speed
Reading – Frequency 3
Shielded Cable for RPM and Speed
Reading – Frequency 4
Sensors Inputs
Connected to pin 87 of the main relay
5V Power for sensors
Shielded Cable for RPM and Speed
Reading – Frequency 4
Sensor ground
Sensors Inputs
EN
5