Eiko LED25WT5HO/46/8 G8D-347V Serie Instrucciones De Instalación

SAFETY PRECAUTION:
DANGER - RISK OF SHOCK - DISCONNECT POWER BEFORE INSTALLATION.
•
electrician.
•
construction features and dimensions shown in the photographs and/or drawings and where the
• WARNING - To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal
or other sharp objects.
• Do not make or alter any open holes in an enclosure of wiring or electrical components during kit
installation.
• Installers should not disconnect existing wires from lamp holder terminals to make new
connections at lamp holder terminals. Instead installers should cut existing lamp holder leads
away from the lamp holder and make new electrical connections to lamp holder lead wires by
employing applicable connectors.
• THIS RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE
SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING
JURISDICTION.
• DO NOT USE WITH DIMMERS.
• DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.
• SUITABLE FOR DAMP LOCATIONS. SUITABLE FOR USE IN ENCLOSED LUMINAIRES.
•
national electrical code or your local electtircal code. If you are not familiar with these codes and
•
•
upgrade kit. Do not intstall if existing wires are damaged.
• "THIS LUMINAIRE HAS BEEN MODIFIED AND CAN NO LONGER OPERATE THE ORIGINALLY
during normal maintenance including lamping.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
EiKO Global, LLC • 23220 W. 84th St, Shawnee, KS 66227 • (P) 1-800-852-2217 • (F) 1-800-492-8975 • eiko.com
EiKO Canada • 81 King St, Barrie, Ontario L4N 6B5 • (P) 1-705-721-5189 • (F) 1-705-721-7855 • orderdesk@eiko.com
INSTALLATION INSTRUCTIONS
LED25WT5HO/46/8XX-G8D-347V