Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION:
1. Make sure the circuit breaker that supplies the
power to the fixture is turned off.
2. Remove lens or diffuser cover (if applicable) and
existing fluorescent lamps.
3. Open/Remove ballast wiring compartment cover.
4. Identify the line and neutral wires running from
the breaker box to the ballast and confirm the
power is off using a voltmeter.
5. Cut all wires connected to ballast, and remove
ballast (and starter if present). Dispose of
removed ballast and fluorescent lamps in
accordance with government regulations in your
area.
6. LED T5 lamps are designed for double-ended
connections only. (Fig 1)
7. Wire using appropriate diagram. (Fig 2/3/4)
8. Reinstall the ballast cover to hide all wires.
9. Install your new LED T5 replacement lamps.
10. Apply the relamping lable on a visible location
inside the fixture.
11. Reinstall lens or diffusion cover on the light
fixture.
12. Turn power on at breaker box and turn on the
lights.
EiKO Global, LLC • 23220 W. 84th St, Shawnee, KS 66227 • (P) 1-800-852-2217 • (F) 1-800-492-8975 • eiko.com
EiKO Canada • 81 King St, Barrie, Ontario L4N 6B5 • (P) 1-705-721-5189 • (F) 1-705-721-7855 • orderdesk@eiko.com
Figure 1 - Double-Ended Connection
Figure 2 - Retrofit with 1 Lamp
Figure 3 - Retrofit with 2 Lamps
Figure 4 - Retrofit with 3/4 Lamps
Publicidad
