Intended Use; Instructions Before Installation - Dometic S7P Instrucciones De Montaje Y De Uso

S7P
5

Intended use

The S7P wall window is suitable for installing in delivery vans with curved exterior
surfaces (radius of 5000 mm). The wall windows are designed as vent windows.
The S7P window is designed for a wall thickness of 22 – 43 mm.
This product is only suitable for the intended purpose and application in accordance
with these instructions.
This manual provides information that is necessary for proper installation and/or
operation of the product. Poor installation and/or improper operating or mainte-
nance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts
provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
6

Instructions before installation

1. Before installation, check the wall thickness of your vehicle. Consult the vehicle
manufacturer if you have any questions.
You need securing clips (not supplied) to suit the thickness of the wall (see
chapter "Preparing the installation" on page 6).
2. With sheet metal coverings, the wall thickness must be increased to at least
22 mm by adding a suitable mounting frame (e.g. wooden frame).
3. When choosing the installation location, observe the following:
– Adjoining components (attachment and reinforcing parts), cables and
cabinets in the vehicle interior must not get damaged when sawing the hole.
– Sufficient space needs to be available for installing the inner and outer frames.
– Only install the wall window on curved wall surfaces with a radius of
5000 mm.
EN
Intended use
5