I-Tech FI06 Manual De Uso página 12

•
Put into 2AAA alkaline batteries and close battery
lid. After new battery is installed, thermometer
will give 2 beeps. If there is no beeps, check if the
positive and negative pole is correct (fig.9.1).
ATTENTION:
•
Take out battery in case the thermometer is not
used for long period. Do not put the battery to fire.
•
Do not throw old or defective batteries into
household waste, for disposal use the appropriate
containers or otherwise according to current
regulations (WEEE). Keep the batteries out of reach
of children.
Maintenance
•
Make sure the sensor and probe cavity are clean
otherwise it will affect accuracy. Cleaning method
for probe:
1.
2.
IACER Srl
Use the cotton stick or soft cloth with water
or alcohol to wipe the casing.
Use the cotton stick or soft cloth with alcohol
to wipe the sensor surface or probe cavity
gently. Do not use thermometer before
alcohol is vaporized.
11
ENG
MNPG314-00