Extra Features; Resetting The Axswc-Tl; Axswc-Tl - Axxess AXSWC-TL Instrucciones De Instalación

`
The Axxess Updater App must be used to program the following:
Changing radio type
If the L.E.D. flashes do not match the radio you have connected, you must manually program the
AXSWC-TL to tell it what radio it is connected to.
Remapping the steering wheel control buttons
If you have AXSWC-TL programmed and you want to change the button assignment for the steering wheel
controls.
Note: Volume Up and Volume Down cannot be remapped.
1. Turn the ignition on, and wait three seconds.
2. Press the reset button for three seconds, then let go.
3. Once flashing fast, wait until the L.E.D. in the AXSWC-TL lights up solid (about twenty seconds).
Note: • Do not press any buttons on the steering wheel or radio during this time.
• If the AXSWC-TL does not flash fast the Reset button was not depressed properly.
4. Once solid, the AXSWC-TL is reset and should be working with default settings.
AxxessInterfaces.com

EXTRA FEATURES

RESETTING THE AXSWC-TL

© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION

AXSWC-TL

I N S TA L L AT I O N I N S T R U C T I O N S
IMPORTANT
If you are having difficulties with the installation of this product,
please call our Tech Support line at 1-800-253-TECH. Before doing
so, look over the instructions a second time, and make sure the
installation was performed exactly as the instructions are stated.
Please have the vehicle apart and ready to perform troubleshooting
steps before calling.
K
®
NOWLEDGE IS
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
REV. 1/24/20 INSTAXSWC-TL
P
OWER