Uline H-8992 Instrucciones De Ensamblaje página 3

8. Attach bracket to underside of tabletop with two
M6 x 25 mm wood screws using drill and 10 mm
socket. Fold spring support back into locking
position and repeat process for other bracket.
(See Figure 7)
Figure 7
9. Put a level on top of tabletop to ensure top is
completely level.
NOTE: If tabletop is not level, adjust the
height of one of the mounting brackets.
10. Ensure all screws and bolts are fully secured.
11. Test folding of workbench to ensure proper
clearance from the wall.
NOTE: If top is having trouble folding down,
adjust spacing of tabletop from wall.
PAGE 3 OF 9
Completed Assembly
OPERATION
To lower tabletop, stand in front and use hands to
push the release levers on both brackets. Gently push
tabletop up to allow spring support to unlock and lower
unit to wall.
To raise tabletop, lift up until the brackets click and
spring supports lock into place. (See Figure 8)
1-800-295-5510
uline.com
Figure 8
0321 IH-8992