Belkin TuneBase F8Z136-BLK Manual Del Usuario página 10

Idiomas disponibles

Transmission Volume Setting

Although the default volume setting will be ideal for most conditions, you

may be able to improve the performance of the TuneBase FM by adjusting

the volume of the transmitted audio signal. The TuneBase FM allows you to

select one of five volume levels. You may wish to decrease the volume if you

experience distorted audio.

The transmission volume setting menu can be accessed by pressing the

"1" and "2" buttons simultaneously. TuneBase FM will display the current

volume setting on the iPod nano, which is represented by "VOL 1" (low),

"VOL 2", "VOL 3" (default), "VOL 4", and "VOL 5" (high).

You can then change the volume level by using the up and down arrows. To

accept your volume selection, simply wait for the iPod nano screen to return

to the iPod Main Menu.

Stereo/Mono Selection

Transmitting music in stereo generally gives you the highest-quality

listening experience. However, you may get better FM signal reception by

changing the transmission to mono. TuneBase FM transmits in stereo mode

by default. We suggest that you switch from stereo to mono transmission

only if your car stereo is NOT receiving a clear signal from the TuneBase FM,

or if you are listening to mono recordings such as audio books.

You can access the stereo/mono transmission menu by pressing the "1"

and "3" buttons simultaneously. The TuneBase FM then displays the current

mode setting, which is represented by "MONO" or "ST". You can change the

mode by pressing the up or down arrows. Either arrow will change between

the two modes. The new setting takes effect immediately.

To accept your mode selection, simply wait for the iPod screen to return to

the iPod Main Menu.

ITransmission Volume Setting | 010

5357_F8Z136eaBLK_man.indb 10

All manuals and user guides at all-guides.com

��

16/1/07 9:40:23

Tabla de Contenido