Initial Setup; Bluetooth Operation - Crosley CR7007D Manual De Instrucciones

English

Initial Setup

Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Remove the tie-wrap that is holding the tonearm.
3. Rotate the Turntable Suspension Screw clockwise until it is all the way
down. This allows the turntable to float on its shock absorbers.
4. Plug the power cord to the power outlet.
Aux Input Connection
You can connect an audio device to this unit and play your music through its
speakers. To do this, rotate the Function Knob to
3.5mm auxiliary cable between your audio device and the Aux In Jack and the
Aux Indicator will turn on red. Now you can start playing the music from your
audio device.
Note: The aux in connection has a higher priority than the Bluetooth connection. When
there is an auxiliary cable plugged in, the aux in connection will automatically override the
Bluetooth mode. To resume using the Bluetooth mode, unplug the auxiliary cable from the
aux in jack.

Bluetooth Operation

1. Turn the Function Knob to / Aux mode, you will hear an activation sound
from the unit, and the Bluetooth Indicator will start flashing.
1. Turn on the Bluetooth feature of your audio device, search for "Crosley
CR7007" and pair.
2. Once your device is successfully paired with the unit, you will hear a short
confirmation sound from the unit and the Bluetooth Indicator will be stable.
3. Play and stream music from your device to the unit.
Note:

Bluetooth version - 4.1

Bluetooth mode has a lower priority than the aux in connection, When there is an
auxiliary cable plugged in, the aux in connection will automatically override the
Bluetooth mode. To resume using the Bluetooth mode, unplug the auxiliary cable from
the aux in jack.
/ Aux mode, connect the
5