Sony PROFORMAWM60 Guia De Instalacion página 9

Installation
STEP 5:
(continued)
B. Using the appropriate screws, washers, and
a Phillips screwdriver, attach the spacers to
the lower pair of "VESA" mount screw holes on
the back of the television.
CAUTION! Do not use a power drill to attach
the spacers to the television.
CAUTION! If the screws are over-tightened,
they may break and cause injury or property
damage.
CAUTION! Excessively long screws can
damage the television housing, causing
injury or property damage. Check your TV
owner's manual for proper screw depth.
C. If you want the television to tilt down
slightly, install the self-adhesive pads (D). Pull
back the protective paper and attach the
pads to the back of the television where it will
contact the wall.
STEP 6
(CONTINUED)
STEP 6:
Hang television on wall bracket
A. The spacers feature kickstands that have
two positions: extended away from the back
of the television and folded flat close to the
television. Confirm that both kickstands are
folded flat close to the television.
B. Lift the television to hang it on the wall
bracket.
CAUTION! Be sure that two or more persons
carry the TV when transporting, mounting, or
dismounting it.
C. Carefully seat the television onto the wall
bracket, making sure that the TV harness
cable snaps into the hook of the wall bracket.
D. When the cable snaps into the hook, you
will hear a distinct metallic "click." It is now
safe to let go of the television.
E. Use the carpenter's level to confirm that
the television is level. If necessary, adjust the
television's position.
CLICK
NOTE: Some televisions with
rear-facing input/output
jacks may require 90-degree
connectors for the cables to
fit behind the television.
FRONT OF TV
(transparent view)
9