JBL SPYRO Manual De Instrucciones página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21
troubleshooting your jbl spyro
JBL Spyro Specifi cations
Frequency Range:
40Hz–20kHz
Power Consumption:
30W maximum
Power Input:
18V/2.5A
Satellite Transducer:
(1) 1 (25mm)Full-range
per channel
Amplifi er Output Power:
6W RMS per channel
Subwoofer Transducer:
6 (152mm)Atlas
Amplifi er Output Power:
24W RMS
Satellites Dimensions:
Diameter – 3-1/4 (83mm)
Height – 2 (51mm)
Subwoofer Dimensions:
Diameter – 8 (203mm)
Height – 5-1/2 (140mm)
System Weight:
4.3 lb (1.95kg)
If you have any questions or need further assistance, please visit www.jbl.com.
These specifi cations are subject to change without notice.
Document Number: 950-0160-001
Symptom
Troubleshooting
No sound from the JBL Spyro
speaker system.
Possible Problem
No power to the system.
Power adapter plug is not
inserted correctly.
No volume or low volume.
Input source is low.
5
5
Solution
Ensure that the power supply is
connected to a live power source
and is properly connected to JBL
Spyro. Note: When JBL Spyro is
powered, a green power LED on
the JBL Spyro subwoofer should
light up.
Touch the volume "Up" (+) pad
on the volume control to un-
mute and/or increase the system
volume level.
Note: Touching the volume
"Down" (–) pad lowers the
system volume. Touching both
the (+) and (–) volume control
pads at the same time will mute
the system.
Increase the volume level on the
audio source device.
Description: JBL Spyro Manual

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Spyro

Tabla de contenido