Troubleshooting - AEG MC 4429 CD Instrucciones De Servicio

English
158

Troubleshooting

Please check with the following table if you can solve the problem yourself before contacting the service center.
Problem
The device cannot be
turned on.
No sound.
CD is not recognized.
Remote control does not
work.
Possible Cause
Mains cable is not connected to wall
outlet.
Wall outlet has no power.
Volume level is set to minimum.
The sound is muted.
The speakers are not connected cor-
rectly.
CD is inserted the wrong way round.
CD is dirty or defective.
CD format not supported by the device. Insert a different CD.
Error on burnt CD.
Distance between remote control and
device too big.
Batteries are exhausted.
Solution
Connect the mains cable to the wall outlet.
Check your fuses.
Increase the volume level.
Press MUTE (41) on the remote control to
unmute the sound.
Ensure that the speakers are connected to
SPEAKERS R/L (28).
Insert CD with the label to the front.
Clean CD or insert a different CD.
Check you home-burnt CD on a different
player.
The remote control has a range of 5 meters.
Change the remote control batteries.