Before Switching On - CORBERO CCML1970NFX Manual De Instrucciones

All manuals and user guides at all-guides.com
Before plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the
Fridge/Freezer. If not see the section called ELECTRICAL INFORMATION

Before switching on!

DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FRIDGE/FREEZER.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30
minutes before switching back on to allow the coolant fluid to settle.
Before filling your Fridge/Freezer
Before storing foods in your Fridge/Freezer, turn the Fridge/Freezer on and wait for 24
hours, to make sure it is working properly and to allow the Fridge/Freezer to fail to the
correct temperature.
START Testing
1. Clean the parts of the refrigerator with lukewarm water containing a littleneutral
detergent and with clear water, and wipe them dry.
lectric parts of the refrigerator can only be wiped by dry cloth.
Notes: E
2.Turn on electricity. The compressor begins to work.
3.Open the door 30 minutes later, if the temperature in the refrigerator
decreased obviously, it shows that the refrigerator system works well.
When the refrigerator operates for a period of time, the temperature
controller will automatically set the temperature within limits it opens.
The display is located in the middle of the refrigerator door. Please refer to the
below figure for the layout.
Introduction of the buttons
（1）
Fridge: to set the refrigerator temperature
（2）
Freezer: to set the freezer temperature
（3）
Function: to choose functions of fast cooling, fast freezing, intelligence
and vacation
（4）
OK: to enter or to quit the existing function
Function setting
★ appliance connected to power at the first time
When the appliance is connected to power at the first time, the display will be lit
for 2 seconds before going normal and the appliance runs with intelligence
function.
★display control
1