Publicidad
USB3.0 Adapter for IDE / SATA Device
Adaptateur pour disque dur IDE / SATA périphérique
Step 2
Connect the power cable to the power adapter.
Step 3
Plug the power supply into the wall. Push the power button. The green LED should
light, and you should hear the drive spin up.
Step 4
After the computer boots, connect the USB plug on the adapter to an available USB
port on the computer. Windows will find new hardware and install the appropriate
drivers.
Step 5
Hardware installation is complete. Your drive is ready to use!
Software Installation
4
No software installation is required! Just plug it in and your drive will be detected
automatically.
To Verify Successful Installation in Windows® 2000/XP
1. Right-click My Computer, and select Properties. Click the Hardware tab, then
Device Manager.
2. You should see a category called Universal Serial Bus Controllers and a device
called USB Mass Storage Device, and a category called Disk Drives with your
drive listed as a USB Drive.
To Verify Successful Installation in Windows® Vista/Windows 7
1. Right-click My Computer, and select Properties. Click Device Manager .
2. You should see a category called Universal Serial Bus Controllers and a device
called USB Mass Storage Device, and a category called Disk Drives with your
drive listed as a USB Drive.
3
RCAD-11003
User's manual
Publicidad
